The Shimmer Jumper Cables
-
Our jumper cables are made of 10 20-gauge strands of our 99.99% pure silver, individually placed in oversized teflon sleeves and hand-woven into a flat litz braid. At an effective 12 AWG, they are the most overbuilt jumper cables on the market.
-
Our conductors are set in several layers of polyurethane foam with a dielectric constant of 1.08 totaling half an inch in diameter. We set three electrically separate layers of shielding in and around this dielectric. The outer shield consists of three shields that are hand-soldered together and run from connector to connector. The result is the best electrical and mechanical shielding we can put in a cable and exceptional AC noise rejection.
-
The flat litz braid in our jumper cables has a near zero bend radius toward the flat side of the braid, making it easy to get the jumpers into place behind your speakers. The sleeving is set into the connector with epoxy so the cables are functionally unbreakable through normal use.
-
Jumpers are priced at $6000/set.
Color is nearly infinitely customizable at no additional cost.