The cores of our interconnects are made of 17 gauge 99.99% pure molecular-forged high density silver wire with a custom Litz geometry. The strands are individually housed in oversized teflon sleeves so the primary dielectric touching the conductor wire is air and no strand interactions can occur.

Our conductors are set in several layers of polyurethane foam with a dielectric constant of 1.08. Embedded in the dielectric is a shield which is only attached to the terminal connector, which accompanies the main .82 inch shield that is attached to both connectors. This essentially convinces the core wire that the shield is always pulling forward, and causes the soundstage to edge toward you in a hauntingly beautiful way. Our interconnects measure at 100 ohms forward and 60 ohms backward.

The combination of monocore silver and polyurethane foam creates a soft, pliable cable with an almost nonexistent bend radius. The cable flows in the hand. Solder joints are stress tested for durability and all sleeving is epoxied to the connector housing, meaning any pull force goes through the connector body and not the solder joint. And if the cable still somehow fails, any cable that’s visually intact has a lifetime warranty.

Standard pricing is as follows:

$12,000 for a 4.5 foot pair

$13,200 for a six foot pair

$14,400 for an eight foot pair

$16,000 for a ten foot pair

$20,000 for a 12 foot pair

Length and color are nearly infinitely customizable at no additional cost.