The hot and neutral legs are each made of an 11 gauge 99.99% pure monocrystalized silver litz weave, meaning our power cables have more of the best conductor silver on the planet per leg than most high end power cables have copper. Each strand of silver is housed individually in an oversize teflon sleeve, making the primary dielectric air and virtually eliminating both dielectric and strand interactions.

The conductors are set in several layers of polyurethane foam with a dielectric constant of 1.08. The hot and neutral legs each have their own shield, and the shields act as the ground leg of the cable. The ground leg of a power cable normally sees no current and primarily acts as a mechanism for sensing circuit faults, but the connection to earth allows for excellent absorption of electromagnetic interference. This, accompanied with the physical separation of the hot and neutral legs, prevents interference both between the hot and neutral legs and from the environment.

The combination of monocore silver and polyurethane foam creates a soft, pliable cable with an almost nonexistent bend radius. The cable flows in the hand. The conductor and the dielectric both stretch to a significant degree, making the solder joint the only potential failure point. Which is why we set the solder joints in epoxy, which has no discernable effect on the sound and makes the cable virtually indestructible, giving you peace of mind that you’ll never have to use the lifetime warranty the cable comes with.

Standard pricing is as follows:

$7,500 for a six foot cable

$10,000 for a ten foot cable

Length and color are nearly infinitely customizable at no additional cost.